Technical

Technical

Technical

Technical service

 

Technical

Brand

Density

g/cm3

Hardness

HRA

Bending

strength TRS

N/mm2

 Recommended use
YG6 14.7~15.1 89.5 1520 Suitable for drawing steel wire, non-ferrous metal wire or bar with diameter less than 20 mm under the condition of high stress. It is also suitable for drawing pipes with diameter less than 10 mm.
YG8 14.6~14.9 89 1670 It is suitable for drawing and drawing of steel, non-ferrous metals and their pipes. It is also suitable for manufacturing machine parts and wear-resistant parts.
YG11 14.3~14.8 88 1860 Suitable for drawing and stamping tools for steel bars under high compression.
YG15 13.9~14.2 86.5 2060 Suitable for drawing and stamping tools for steel bars under high compression.
YG20 13.4~13.8 83.5 2480 Suitable for stamping die, such as stamping watch parts, musical instrument strings, punching batteries.
YG20C 13.4~13.8 82 2480 It is suitable for making cold upsetting, cold punching, cold pressing dies and shell cold pressing dies for standard parts, bearings, tools and other industries.
YG25 13.2~13.6 80 2600 It is suitable for cold heading and cold punching of standard parts, bearings, tools and other industries.
YL10.2 14.5~14.8 90 2400 Suitable for drawing and stamping tools of steel tube for steel bar under high compression rate.

 

Brand Physical and mechanical properties Recommended use

Density

g/cm3

Bending strength is not lower than

/mm2

Hardness is not

lower than

HRA
YF06 14.9 3800 91.1 It is suitable for processing aluminum, magnesium alloy, non-ferrous metal, plastic and other non-metallic materials, glass fiber and other composite materials. It is recommended for making light cutting drill, milling cutter and reamer.
YL10A 14.65 4000 92.8 It is suitable for processing cast iron, non-ferrous metals, and also for light cutting of common steel parts. It is recommended for making drill, milling cutter, reamer and light cutting milling cutter.
YL10.2 14.45 4000 91.5 Suitable for processing non-ferrous metal, cast iron, carbon steel, stainless steel, heat-resistant steel and other steel; recommended for making drill, milling cutter, reamer, tap. Used in low speed rough turning and milling wear-resistant alloy titanium alloy, it can also be used in glass fiber reinforced plastic to make PCB micro drill.
XF20 14.45 4000 91.7 Suitable for processing non-ferrous metals, cast iron, carbon steel, stainless steel; especially suitable for processing steel with HRC ≤ 40. Recommended for making milling cutter and reamer
XF30 14.18 4000 92.3 Suitable for processing carbon steel, stainless steel, hardened steel (especially HRC between 40-65), heat-resistant steel and other alloy steel, titanium alloy, nickel base alloy and other difficult to process materials; recommended for making milling cutter
YL50 14 4000 87 It is suitable for making punching die and other wear-resistant parts.

 

Brand Physical and mechanical properties Recommended use

Density

g/cm3

Hardness is not

lower than

HRA(HV)

Bending strength

is not lower than

TRS(Mpa)
YK05 14.98 90.1 2900 It is mainly used for medium and small size cemented carbide column teeth, drilling in soft and medium hard rock strata, and also as alloy sheet for other drilling tools.
YK10 14.74 88.4 2710 It is mainly used for medium and small size cemented carbide column teeth, drilling in soft and medium hard rock strata, and also as alloy sheet for other drilling tools.
YK15.1 14.74 88 2700 It is mainly used for medium and small size cemented carbide column teeth, drilling in soft and medium hard rock strata, and also as alloy sheet for other drilling tools.
YRK10 14.71 88 2700 It is mainly used for medium and small size cemented carbide column teeth, drilling in soft and medium hard rock strata, and also as alloy sheet for other drilling tools.
YK20.1 14.57 87.7 2900 It is mainly used as cemented carbide column tooth, drilling medium hard and hard if layer, and it can also be used as alloy sheet for other drilling tools.
YK20 14.52 87.3 2800 It is mainly used as cemented carbide column tooth, drilling medium hard and hard if layer, and it can also be used as alloy sheet for other drilling tools.
YK25 14.52 87 2700 It is mainly used as cemented carbide column tooth, drilling medium hard and hard if layer, and it can also be used as alloy sheet for other drilling tools.
YK25.1 14.53 87.5 2800 It is mainly used as cemented carbide column tooth, drilling medium hard and hard if layer, and it can also be used as alloy sheet for other drilling tools.